CHAUVIN ARNOUX – Tachometer C.A 1727

Categories: ,

With its rotary switch, the C.A 1727 is simple to use and offers numerous measurement possibilities with or without contact. The C.A 1727 is equipped with storage capacity and a USB interface so that the data can be processed with the Tachograph software (delivered as standard).

Measurement by photo-reflection for no-contact measurement: a reflective strip is positioned on the part to be tested.
Contact measurement with accessories: a mechanical adapter (cylinder, cone or calibrated wheel) converts the rotation speed into pulses which are then measured by the tachometer.

The digital display shows a 42-segment bargraph, the functions selected, the alarm thresholds, etc.
The rotary switch gives direct access to 7 different measurement units (RPM, Hz, etc.) and each key on the keyboard corresponds to a function (MIN MAX, Smoothing, alarms, etc.).

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

RPM Function Range: 60 to 100,000 rpm
Resolution: 0.006 to 6 according calibre
Accuracy: 1 x 10-4 of reading ± 6 counts
m/min Function Range: 6 to 10,000 m/min
Resolution: 0.006 to 6 depending on calibre
Accuracy:1 x 10-4 of reading ± 1 increment
Hz Function Range: 1 to 10,000 Hz
Resolution: 0.004 to 0.4 depending on calibre
Accuracy: 4 x 10-5 of reading ± 4 counts
ms Function Range: 0.1 to 1,000 ms
Resolution: 0.0003 to 0.03 depending on calibre
Accuracy: 1 x 10-4 of reading ± 5 counts
Duty Cycle Function Range: 0.1 to 100 %
Resolution: 0.1 to 1 % depending on calibre
Accuracy: 0.1 % of scale from 0.2 Hz to 50 Hz • 0.2 % of scale from 50 Hz to 125 Hz • 1 % of scale otherwise
Count Function (CA 1727) Range: 0 to 100,000 events
Accuracy: ± 1 event
Power Supply 9V
Battery Life 250 x 5 min measurements with optical sensor
600 x 5 min measurements with external sensor
Memory 4,000 points
Dimensions 21 x 72 x 47 mm
Weight 250g
Leakproofing IP 51
Environment Storage: -20 °C to +70 °C 95 % RH
Operation: 0 to 55°C 90 % RH
Optical Sensor Specs Reflective area: 10 to 90 % of the target area.
Measurement distance: 1 to 50 cm. The maximum distance is given for a reflective adhesive strip
with a minimum area of 10 cm2.
Measurement angle: ± 15° in relation to the perpendicular of the reflective surface.
Mechanical Adapter Specs End-fittings: elastomer with a hardness of 80 shores
Pressure on moving part: between 2 and 40 N.
Maximum speed: 10,000 rpm.
Service life: approx. 1,000 hours at 3000 rpm with a pressure of 20
Conical End Fitting Accessory Specs Minimum diameter of measurement shaft: 5 mm.
Cylindrical End-Fitting Accessory Specs Speed measurements on shafts with a diameter greater than 5 mm or flat-ended shafts
End-Fitting Accessory (with Wheel) Specs Wheel diameter: 30.183 mm.
Wheel development: 10 cm ± 0.1 mm

Download