HIOKI – 9709 AC/DC

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes.

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9709 is a DC to 100kHz/500A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc.

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

Rated current 500 A AC/DC
Max. allowable input 700 Arms (1000 Apeak, requires derating at frequency)
Frequency characteristics Amplitude: DC to 100 kHz, Phase: DC to 100 kHz
Amplitude and Phase accuracy DC, 45 Hz ≤ f ≤ 66 Hz (±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2 deg)
Be defined to 100 kHz
Power consumption 5 VA max. (at 500 A/55 Hz, ±12 V power requirement)
Output voltage 2 V/rated current range (voltage output with the Sensor Unit 9555-10, use with a device having a 1Mohm input resistance or higher)
Max. rated voltage to earth 1000 V AC/DC (50/60 Hz, CAT III )
Core diameter φ 36 mm (1.42 in)
Operating temperature, humidity 0°C to +50°C (32°F to 122°F), 80% rh or less (with no condensation)
Power requirements DC ±11 V to ±15V (Power suppled via the 9555-10, 9555-10 requirement with 100 to 240 V AC)
Dimensions, mass 160W (6.30 in) × 112H (4.41 in) × 50D (1.97 in) mm, Cord length: 3 m (9.84 ft), 850 g (30.0 oz)
Supplied accessories Mark bands × 6, Operating manual × 1

Downloads