HIOKI – RM3545

Currently, progress in energy-saving initiatives is being matched by the accelerated use of renewable energy.

Currently, progress in energy-saving initiatives is being matched by the accelerated use of renewable energy. At the same time, increased advancements in technologies such as electric automobiles and solar power systems are forecasted, and the market for electronic components such as coils and inductors, indispensable building blocks of these technologies, is expected to expand.

This leads to the rising need in the ability to measure low resistance values at higher levels of precision during the development and production of these electronic components, and to aptly meet such need, Hioki has developed the Resistance Meter HIOKI RM3545. On the opposite spectrum, electronic components make extensive use of materials with high resistance values, for example conductive sheets and conductive rubber. The Hioki RM3545 was also developed to accommodate such materials.

 

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

Resistance range 10 mΩ (12.00000 mΩ display Max., 10 nΩ resolution) to 1000 MΩ range (1200.0 MΩ display Max., 100 kΩ resolution), 12 steps
[LP ON] 1000 mΩ (1200.00 mΩ display Max., 10 µΩ resolution) to 1000 Ω range (1200.00 Ω display Max., 10 mΩ resolution), 4 steps
Measurement accuracy: ±0.006 % rdg. ±0.001 % f.s.
Testing current 1 A DC to 1 µA or less [LP ON] 1 mA to 5 μA DC
Open-terminal voltage 20 V DC (10 kΩ range or more), 5.5 V DC max. (1000 Ω range or less)
[LP ON] 20 mV DC max.
Temperature measurement -10.0 to 99.9 °C, accuracy: ±0.50 °C (Temperature Sensor Z2001 and RM3545 combined accuracy), -99.9 to 999.9°C (analog input)
Measurement speed FAST (2.2ms) / MED (50Hz: 21ms, 60Hz: 18ms) / SLOW1 (102ms) / SLOW2 (202ms)
Functions Temperature correction, temperature conversion, offset voltage compensation (OVC), comparator (ABS/ REF%), BIN, key-lock (OFF, menu lock, all lock), display digit count selection function (7- digit/ 6-digit/ 5-digit), automatic power supply frequency settings (AUTO/ 50Hz/ 60Hz), scaling, judgment sound setting, auto hold, averaging, statistical calculations, panel store/panel load, D/A output.
Multiplexer [Only RM3545-02] Support Unit: Z3003 (Install up to 2 units)
Communication
interfaces
Select from GP-IB (RM3545-01 only), RS-232C, Printer (RS-232C), or USB . Remote function, communications monitor function, data output function, memory (50)
Power supply 100 to 240 V AC, 50/60 Hz, Rated power consumption: 40 VA
Dimensions and mass 215 mm (8.46 in) W × 80 mm (3.15 in) H × 306.5 mm (12.07 in) D
[RM3545/RM3545-01] 2.5 kg (88.2 oz), [RM3545-02] 3.2 kg (35.3 oz)
Accessories Power cord ×1, Clip type lead L2101 ×1, temperature sensor Z2001 ×1, Male EXT. I/O connector ×1, Instruction manual ×1, Application disc ×1, USB cable (A-to-B type) ×1, Spare fuse ×1

Downloads