HIOKI – 3169-20

Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy.

Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3169 is clamp on power meters designed to measure demand and harmonics, which are important for energy management, as well as basic electrical parameters such as voltage, current, power, power factor, and integrated power (watthours).

 

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

Measurement line & number of circuits Single-phase 2-wire (4 circuits), single-phase 3-wire (2 circuits), three-phase 3-wire (2 or 1 circuit), and three-phase 4-wire (1 circuit)
Note: 50 or 60 Hz, and that share the same voltage line
Measurement item Voltage, current, active/ reactive/ apparent power, active/ reactive power integration, power factor, frequency, harmonic value
Measurement range Voltage range: 150/ 300/ 600 V AC
Current range: [when using the 9694] 500 mA, 1/ 5 A AC
[when using the 9695-02] 500 mA, 1/ 5/ 10/ 50 A AC,
[when using the 9660, 9695-03] 5/ 10/ 50/ 100 A AC
[when using the 9661] 5/ 10/ 50/ 100/ 500 A AC
[when using the 9669] 100/ 500/ 1 kA AC
[when using the 9667] 500/ 5 kA AC
Power range: 75 W to 9 MW (Depends on combination of voltage and current range)
Measurement method Digital sampling, PLL synchronization or 50/60 Hz fixed clock
Basic accuracy Active power: ±0.2% rdg. ±0.1% f.s. + clamp-on sensor accuracy (at 45 to 66 Hz)
Display refresh rate 2 times /sec (except when using a PC card while accessing the internal memory, or when performing RS-232C communications)
Data save interval Standard interval: 1/ 2/ 5/ 10/ 15/ 30 seconds, or 1/ 2/ 5/ 10/ 15/ 30/ 60 minutes
Frequency characterristics Fundamental waveforms up to the 50th order ±3% f.s. + measurement accuracy (of a 45- to 66-Hz fundamental waveform)
Other functions Error connect check, language selection, display hold, setting backup, power shut off management, key lock, [3169-21 only] D/A output 4 channels, ±5 V DC f.s.)
Power requirements 100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions, mass 210 mm (8.27 in) W × 160 mm (6.30 in) H × 60 mm (2.36 in) D, 1.2 kg (42.3 oz)
Supplied accessories Voltage cord set 9438-53 ×1 (1 cord each of black, red, yellow, and blue), Power cord ×1, Instruction manual × 1, Quick start manual × 1, CD-R ×1 (RS-232C interface operating manuals), Input cord label ×1, Connection cable 9441 ×1 (for the 3169-21 only)

Downloads