HIOKI – 8910

Select CAN Bus information and convert the signals into analog/logic signals to input into your recorder or data logger.

Select CAN Bus information and convert the signals into analog/logic signals to input into your recorder or data logger. Record both CAN adapter analog output and actual analog data (e.g., sensor output) simultaneously

 

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

Input CAN-Bus interface2-channel (Receive only)
Number of output channels Up to 12 analog channels and 6 logic channels – 24bit
Output resolution 16bit
Output voltage -5 to 5V (Analog), 0 to 5V (Logic)
Response speed Can follow up to a 1ms CAN-Bus refresh rate (1kS/sec max.)
Interface RS-232C (For data selection settings only)
Functions -1. Function specifications:
(1) Settings of CAN-Bus defined data (Various parameter settings to capture required data from CAN-Bus)
(2) CAN-Bus signal input port settings
(3) Output channel settings (Settings to determine output channels for captured data), etc.
-2. Setting Methods
(A) From the 8910 CAN Set software (bundled with the 8910), Items (1) and (3) above can be set.
(B) Send settings via RS-232C
Power supply (1) AC adapter (100 to 240Vac universal, 12V/2.5A dc output)
(2) 10 to 30Vdc (Can be supplied from a cigarette lighter socket in an automobile.)
(3) Supplied from CAN-Bus signal input connector (10 to 30Vdc)
Dimension and Mass 180W × 50H × 100D mm, 940g
Accessories AC Adapter (1), RS-232C Cable (1), CAN Cable 9713-01 (1), CD-R (including 8910 Setting Software)

Downloads