TROTEC – TTK 355 S

Reduce high levels of relative humidity in minimum time or easily keep large rooms dry – the TTK 355 S is in its element, this is what it was made for.

Reduce high levels of relative humidity in minimum time or easily keep large rooms dry – the TTK 355 S is in its element, this is what it was made for.

This becomes possible because of a clever combination of a strong 1.27 kW rotary compressor and a quality fan for air flow rates of up to 1,000 m³/h.

Thanks to the high air circulation, the tuned heat exchange system is always able to feed extreme humidity from the ambient air for quick drying. Up to 70 litres of humidity can be removed from the room air per day with just one TTK 355 S in this manner.

At the same time, compared with other defrost systems, the high-quality hot gas automatic defrost of the TTK 355 S guarantees a much more efficient dehumidification performance without defrost pauses on a time interval during which no dehumidification occurs.

Common location changes and use in rough construction site conditions are no problem for this condenser dryer:
Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 355 S can easily be transported over uneven terrain or up and down stairs – the rotary compressor makes it possible to transport it anywhere. And the non-marking rubber wheels leave no marks on your floorboards or other sensitive undergrounds.

A special enclosure protects the electronic components of the dehumidifier from hazardous dust or moisture, which can interfere with the functionality and durability of the electronics.

The enclosure is in no way inferior to the impressive inner values: All components of the TTK 355 S are reliably protected and attractively combined in the tried and tested German industrial design – protected prototype.

Even in storage, the TTK 355 S makes a good impression – while taking up surprisingly little space. Due to its two practical stacking grooves on top, equally sized TTK‑S devices can be safely stacked to save space during transport and storage.

A few practical benefits:

  • Development, design, production: 100 % Trotec
  • High dehumidification performance even at low temperatures
  • Maximum dust and dampness protection for all electrical components
  • Very easy to maintain construction
  • Optimal handling
  • Portable and easily stored anywhere thanks to its rotary compressor
  • Practical stacking groove for stable, space-saving storage and transport
  • Stackable with equally dimensioned models
  • Tried and tested German industrial design – protected prototype
Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

General information
Article number 1.120.000.163
Dehumidification performance
At 30 °C / 80 % RH [l/24h] 55
At 20 °C / 60 % RH [l/24h] 27
Max. [l/24h] 70
Amount of air
Max. air volume [m³/h] 1,000
Recommended room size construction drying
450
Recommended room size dry keeping
900
Surrounding conditions
Temperature range min. [°C] 5
Temperature range max. [°C] 32
Humidity range min. [% RH] 32
Humidity range max. [% RH] 100
Electrical values
Input voltage [V] 230
Frequency [Hz] 50
Max. power input [kW] 1,27
Nominal current consumption [A] 5,8
Recommended fusing [A] 10
Required current starting phase [A]
Compressor
Reciprocating piston compressor
Rotary piston compressor
Type of cooling agent R-410A
Water tank
Water tank [L] 6
Sound values
Sound pressure level [dB (A)] 1 m 54
Sound pressure level [dB (A)] 3 m
Dimensions (packing excluded)
Length [mm] 450
Width [mm] 510
Height [mm] 720
Weight (packing excluded)
Weight [kg] 39

Equipment, features and functions

Automatic defrost
Hot gas
Electronic
Automatic dehumidification
Analogue hygrostat
Electronic hygrostat
Hygrostat-controlled
Program-controlled
Fan
Axial
Radial
Fan stages 1
Condensate tank monitoring
Container available
Shut-off when full
Indicator container full
Room air filter
Easily accessible
Cleanable
Ionizer connectable
Timer function
Switch-off time preselectable
Switch-on time preselectable
Operating hours counter
Operating hours counter
Power meter
Mobility
Plastic wheels
Rubber-tyred metal wheels
Carry/transport handle(s)
Non-marking full-rubber wheels
Swivel casters with parking brakes
Adjustable bar handle
Condensate drain
Recommended hose size [mm] 19
Hose included in the scope of delivery
Hose connection possible
Condensate pump
Control panel
Digital display
Protective bar
Shelf life
Stackable
Adjustable discharge direction
Manual
Swing function
Housing design
Plastic
Steel coated
Stainless steel

Download