TROTEC – VX 5

The VX 5’s three-step variable turbo engine achieves up to 20,000 rpm and guarantees maximum efficiency at any power level, because due to the integrated HiDry automatism the current volumetric flow is recorded continually in m³ and the VX 5 is automatically regulated to the optimum air flow rate.

Which device is suited for which type of drying? Already with the previous model this issue was a thing of the past, for the unique adaptronic power control of the VX 5 renders thinking in equipment classes virtually redundant:

The VX 5’s three-step variable turbo engine achieves up to 20,000 rpm and guarantees maximum efficiency at any power level, because due to the integrated HiDry automatism the current volumetric flow is recorded continually in m³ and the VX 5 is automatically regulated to the optimum air flow rate.

At the touch of a button the device switches either into a higher performance class or, if required, into the additionally available whisper mode.

Performance-optimized energy consumption
Unlike conventional side channel compressor turbines, the VX 5 MultiQube turbo engine’s output and power consumption are always linear and directly interrelated:

When the power stage is cut back or the counter-pressure decreases, the power consumption is equally reduced. Plus the performance control is not effected based on resistance, but geared to the required volumetric flow.

Due to this technique, the VX 5, compared to side channel compressors, works more or less at the energy-saving eco tariff, especially during the final drying phase.

Always just as much power as you need:

  • Power stage 1:
    Corresponds to the output of a 0.8 kW side channel compressor.
  • Power stage 2:
    The VX 5 is approx. 10 % more powerful than a side channel compressor with 1.1 to 1.3 kW.
  • Power stage 3:
    Corresponds to 140 % of the output of a 1.1 kW to 1.3 kW side channel compressor and to 80 % of the performance of a 3 kW side channel compressor.

Features

  • Professional quality “made in Germany” – originally produced by Trotec
  • Exceptional, adaptronic power control – renders thinking in equipment classes virtually redundant
  • Replaces all side channel com­pressors of the performance classes from 0.8 kW to 3 kW
  • Ultralight – only 10 kg
  • 35 % lighter than comparable competition models
  • Up to 75 % lighter than side channel compressors with the same performance class
  • DA-4 interface for linking up all device data incl. real-time remote monitoring of system status and drying progress
  • Optiflow NT multi-function display with plain text status indication and colour illumination for power control
  • Digital counter for operating hours and energy consumption
  • Whisper mode for noiseless night operation
  • Non-wearing touchscreen control panel
Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

General information
Article number 1.560.000.042
Recommended room size excess pressure
90
Recommended room size low pressure
70
Peak excess pressure
mbar 270
Peak low pressure
mbar 220
Air volume (freely blowing)
Air volume stage 1 [m³/h] 80
Air volume stage 2 [m³/h] 160
Air volume stage 3 [m³/h] 250
Electrical values
Max. power input [kW] 1,2
Input voltage [V] 230
Frequency [Hz] 50
Nominal current consumption [A] 5,5
Recommended fusing [A] 16
Motor protection
Thermo contact
Electronic
Overheating protection
High-temperature bearing
Coarse particle protection
Inlet duct
Outlet duct
Standard equipment
Optiflow display
HotStop system
Operating hours counter
Power meter
Spare fuse
Service power socket for dehumidifiers
Mobility
Carry/transport handle(s)
Swivel casters with parking brakes
Shelf life
Stackable
Dimensions (packing excluded)
Length [mm] 420
Width [mm] 430
Height [mm] 415
Weight (packing excluded)
Weight [kg] 10
Scope of delivery
Device
Connectors 38 mm
Filter screen

Download