TROTEC – ID 1200

Whether for construction site heating, intervention in case of heating failures in residential and industrial buildings or for temperature control of large halls and marquees – the central oil heating unit ID 1200 was specifically designed for fully automatic, universal and unproblematic heating operation for demanding rentals at frequently changing locations.

Whether for construction site heating, intervention in case of heating failures in residential and industrial buildings or for temperature control of large halls and marquees – the central oil heating unit ID 1200 was specifically designed for fully automatic, universal and unproblematic heating operation for demanding rentals at frequently changing locations.

All process and control elements are integrated behind lockable panels and thus protected against unauthorized access. Thanks to crane lifting lugs and integrated forklift pockets on all sides, transport, assembly and disassembly of this compact central heating unit can be realized quickly and economically.

Once commissioned, the ID 1200, running on a separate forced-air oil burner and equipped with an efficient fuel preheater as well as a heating oil filter protected from weather influences, is cold-resistant to ambient temperatures of as low as -20 °C.

A few practical benefits:

  • Branded burner with high efficiency
  • Single line system with automatic ventilation
  • Large volume 300 W fuel pre-heating
  • Photo cell flame monitoring
  • High-performance heat exchanger
  • Fully automatic operation with room air control
  • High-pressure radial fan for long hose distances
  • Cold-resistant to ambient temperatures of as low as -20 °C
  • Lockable doors for operating elements and burner
  • Built-in protected control box with operating hours counter
  • Easy to service due to removable side panels
  • Automatic fan with control for the rotation direction
  • Built-in automatic circuit breaker
  • Summer/winter selection switch for an optional ventilation without heating function
  • Stainless steel skids for stationary use and transport
  • Forklift receptacles
  • Suitable for the fully automated use with external thermostat
Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

General information
  Article number 1.430.001.200
Functional principle
  Method of heating direct
  Method of heating indirect
Amount of air
  Max. air volume [m³/h] 14,400
Max. air pressure
  Air pressure stage 1 [Pa] 300
  Air pressure stage 2 [Pa]
  Air pressure [Pa] 300
Fan
  Axial
  Radial
Nominal heat input
  Stage 1 max. [kW] 200
  Stage 2 max. [kW]
  max. [kW] 200
Nominal heat output
  Stage 1 [kW] 185
  Stage 2 [kW]
  max. [kW] 185
Nominal heat output
  Stage 1 [kcal] 159,071
  Stage 2 [kcal]
  max. [kcal] 159,071
Temperature increase
  Stage 1 [°C] 40
  Stage 2 [°C]
  max. [°C] 40
Electrical values
  Input voltage [V] 400
  Frequency [Hz] 50
  Current consumption [A]
  Current consumption [A] stage 1 9
  Current consumption [A] stage 2
Electrical connection
  Plug type CEE 16 A
Operation
  Internal thermostat
  Overheating protection
  Connection for external thermostat
Fuel feed
  Compressor
  Danfoss pump
  Suntec pump
Fuel filter
  Available
Max. oil consumption
  Stage 1 [l/h] 21
  Stage 2 [l/h]
  Max. [l/h] 21
Tank capacity
  [l]
Hose connection
  Diameter [mm] 550
Chimney connection
  Diameter [mm] 200
Sound values
  Sound pressure level [dB (A)] 1 m 69
Mobility
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Forklift
  Crane
Dimensions (packing excluded)
  Length [mm] 2,400
  Width [mm] 800
  Height [mm] 1,300
Weight (packing excluded)
  Weight [kg] 490

Download