TROTEC – IDS 45

The IDS 45 is an absolutely reliable oil heater fan, it requires minimum maintenance effort and gets you healthy through the winter even at cold workstations. With an air flow rate of 2,500 m³/h it has a nominal heat input of max. 58.6 kW.

Safety is the top priority of the oil heater manufactured in Europe. The housing is double-walled and with its protective coating provides an optimum soundproofing while simultaneously minimizing the surface temperature of the outer casing and thus the risk of injuries for the user. The IDS 45 is further equipped with an electronic flame trap, safety thermostat for overheating protection, fully automatic after-cooling and a high-temperature resistant heat exchanger.

For longer heating applications the heater, in addition to the integrated fuel container, can also be connected to an external oil tank. Of course, a hose connector and thus an air hose of 7.6 metres length can also be attached to this model as well as a two-way hose distributor for the connection of two hoses.

The IDS 45 is an absolutely reliable oil heater fan, it requires minimum maintenance effort and gets you healthy through the winter even at cold workstations. With an air flow rate of 2,500 m³/h it has a nominal heat input of max. 58.6 kW.

A few practical benefits:

  • Integrated oil burner with Danfoss® pump
  • Electronic flame trap
  • Overheating thermostat
  • Stainless steel combustion chamber
  • Heat exchanger
  • Fully automatic after-cooling
  • Double-walled housing for optimum soundproofing and insulation
  • Integrated fuel tank
  • Suited for the fully automatic application with external thermostat or timer switch
  • Oil pre-heating (optional)
  • Connection facility for air transport hose
Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

General information
  Article number 1.430.000.130
Functional principle
  Method of heating direct
  Method of heating indirect
Amount of air
  Max. air volume [m³/h] 2,500
Max. air pressure
  Air pressure stage 1 [Pa]
  Air pressure stage 2 [Pa]
  Air pressure [Pa]
Fan
  Axial
  Radial
Nominal heat input
  Stage 1 max. [kW] 58,6
  Stage 2 max. [kW]
  max. [kW] 58,6
Nominal heat output
  Stage 1 [kW] 52,5
  Stage 2 [kW]
  max. [kW] 52,5
Nominal heat output
  Stage 1 [kcal] 45,142
  Stage 2 [kcal]
  max. [kcal] 45,142
Temperature increase
  Stage 1 [°C] 66
  Stage 2 [°C]
  max. [°C] 66
Electrical values
  Input voltage [V] 230
  Frequency [Hz] 50
  Current consumption [A] 3,8
  Current consumption [A] stage 1 3,8
  Current consumption [A] stage 2
Electrical connection
  Plug type CEE 7/7
Operation
  Internal thermostat
  Overheating protection
  Connection for external thermostat
Fuel feed
  Compressor
  Danfoss pump
  Suntec pump
Fuel filter
  Available
Max. oil consumption
  Stage 1 [l/h] 5,59
  Stage 2 [l/h]
  Max. [l/h] 5,59
Tank capacity
  [l] 65
Hose connection
  Diameter [mm] 350
Chimney connection
  Diameter [mm] 150
Sound values
  Sound pressure level [dB (A)] 1 m 72
Mobility
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Forklift
  Crane
Dimensions (packing excluded)
  Length [mm] 1,310
  Width [mm] 510
  Height [mm] 965
Weight (packing excluded)
  Weight [kg] 81

Download