TROTEC – TFV 30 S

The stackable TFV 30 S comes with three variable power stages, so the air volume can always be optimally adjusted to the different requirements of the object. Its housing consists of indestructible polyethylene and is therefore equally light and robust.

Due to its especially formed air exhaust duct, this turbo fan produces a wide air current near the ground above wet flooring or screeds. The room air is thus optimally distributed which perceptibly reduces drying time.

In the case of carpet cleaning, the accelerated drying besides time saving also brings along the advantage, that natural fibre fabrics distinctly less often lose their shape and corrugation can be avoided.

But also when assisting in wall and floor drying after a water damage, or else speeding up the drying of screed and entire buildings, the TFV 30 S can provide valuable services.

The stackable TFV 30 S comes with three variable power stages, so the air volume can always be optimally adjusted to the different requirements of the object. Its housing consists of indestructible polyethylene and is therefore equally light and robust.

Practical: Service socket and optional triple hose distributor

A helpful equipment feature of the TFV 30 S is the integrated service socket. Even when no cable drum or further wall sockets are available, one can e.g. connect a second turbo fan or an additional dehumidifier for drying support directly to the TFV 30 S.

Furthermore, a triple hose connector is optionally available with which the air flow can be focused on up to three different spots in only one work step. If less than three hoses are to be connected the supplied sealing plugs reliably seal the not required hose connections.

A few practical benefits:

  • Robust polyethylene housing
  • Double-flow radial fans with extra large shaft
  • Three fan stages
  • Operation and storage possible in several angular positions
  • High energy efficiency, thus equally powerful and energy-saving
  • Stackable
  • Motor with quality ball bearing – no unilateral stress on the shaft
Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

General information
  Article number 1.510.003.031
Amount of air
  Air volume stage 1 [m³/h] 1,400
  Air volume stage 2 [m³/h] 2,100
  Air volume stage 3 [m³/h] 2,300
  Air volume freely blowing max. [m³/h] 2,300
Air current
  Blowing out
  Sucking in
Fan
  Fan stages 3
  Axial
  Radial
Air discharge speed
  [m/s] 10
  [km/h] 36
Discharge distance
  Outside [m]
  Inside [m]
Air pressure
  Air pressure max. [Pa] 400
Transport medium temperature
  max. [°C] 60
Electrical values
  Input voltage [V] 230
  Frequency [Hz] 50
  Nominal current consumption [A] 5,2
  Power input [kW] 1,2
  Recommended fusing [A] 10
Electrical connection
  Plug type CEE 7/7
  Cable length [m] 5
Surrounding conditions
  IP type of protection 22
Sound values
  Sound pressure level [dB (A)] 3 m 73,5 / 80,8 / 86,2
Hose connection
  Diameter [mm]
  Max. hose length [m]
Mobility
  Carry/transport handle(s)
Shelf life
  Stackable
Dimensions (packing excluded)
  Length [mm] 515
  Width [mm] 545
  Height [mm] 490
Weight (packing excluded)
  Weight [kg] 18,5

Download