The level meter dedicated to sanitary optimum for food and medical treatment. It corresponds to CIP · SIP.

As sanitary process dedicated machine to achieve a high level of safety and reliability (SIP compatible)

  • It is a continuous level meter ideal for food, medicine and cosmetic process.
  • It is a product that takes into consideration the sanitary safety required for the sanitary process.
  • Excellent detergency and chemical resistance, you can use in many fields.
    ■ Ideal for liquid level measurement of drinking water, distilled water, hot water, cold water etc.
    ■ We also support dairy products, edible oils, chocolate, chemicals, alcohol and so on.
    ■ It can be used with simple initial setting (one touch push button).

The sensor part is completely covered with the PFA tube integrated with the Herre gasket, and there is no joint part with multiple parts. It also prevents residual liquid due to penetration of junctions and clogging of slight foreign matter in joint grooves.

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]


1. CIP, SIP corresponding
heat-resistant 150 ℃, to achieve a pressure 0.5MPa, corresponds to the CIP · SIP of sanitary process.

2. pursue the sanitary of
the sanitary corresponding structure, liquid to prevent the clogging of the rest and the groove of the small foreign matter or the like, to solve this problem is of hygienic pollution and flavoring that causes the problem.

3. chemical resistance and the Food Sanitation Law on material
can withstand the acid and alkali washing, wetted All PFA (fluorine resin). In addition, the wetted part (PFA) uses materials conforming to the Food Sanitation Law.

4. durability
fit safe waterproof casing to a variety of site environment and the sensor structure to operate in harsh environments (IP68).

5. adopt the free power
can be used in countries around the world because it uses the free power of AC / DC20 ~ 250V.

6. CE Mark-certified product
in the case of integrated · DC24V power during use, has acquired the CE mark.


Use  Remaining amount measurement (level meter / level meter)
Measured object  Liquid / viscous liquid / interface / foam / bubble neglect
Detailed measurement item  Tap water, distilled water / alcohol / pure water, ultrapure water / corrosive liquid / chemical liquid (acid / alkali) / cleaning liquid / oil (non explosion) working oil / waste liquid / viscous liquid · slurry · sludge (paint, Honey) / substances with high conductivity and high adhesion (sludge, urine, sea water, soy sauce, caustic soda, carbon, miso, shampoo etc.) / bubble detection, bubble neglect detection / interface detection
Contact / non-contact  contact
Measuring method  Capacitive type
Explosion proof  None (non-explosion-proof)
Tank size  Medium size (drum size)
Mounting position  Vertical (from above)
Detailed measurement environment  When there is a flow of liquid / liquid with ruffles / determination of detection of liquid by CIP process in raw material level control / food process


Amplifier section

Power supply AC / DC 20 to 250 V
Power consumption DC 24 V: 1.5 W AC 100 V: 2.5 V A AC 200 V: 3.5 V A
Operating ambient temperature -25 ℃ ~ + 60 ℃
output Current output DC 4 to 20 mA (load resistance 500 Ω or less)
Measurement accuracy ± 1%
resolution The larger one of 0.025% or 0.02 pF with respect to 0 to 100%
Response speed (delay) About 0.03 to 30 seconds variable
Case material ADC 12
Wiring port G1 / 2
weight Integral type: Approx. 800 g (Head part only, not including electrode), Separate type: Approximately 300 g (only for amplifier part, not including electrode cable)
option RS-485 communication, handy monitor

Sensor part

Material Coat PFA (internal electrode SUS 316 L)
Insulator material PTFE
Allowable temperature -10 to + 150 ° C
Allowable pressure 0.5 MPa
Protection grade IP68
L dimension Maximum length of 3700 mm
option Condensation countermeasure, amplifier separation type, heat resistant specification, amplifier case SUS made


Size IDF / ISO 1S / 1.5S Helle (can be changed upon request)
Material SUS 316 L