Ideal for small containers and small tanks of the order of a few liters. It also supports severe conditions.

Small capacitance type level gauge to achieve a high degree of precision and miniaturization ideal for liquid level measurement of small tank

  • It is a continuous liquid level gauge most suitable for small containers / small tanks of about several liters.
  • It achieves high cleaning performance and corrosion resistance, and it also supports severe conditions.

Measurement of viscous liquids and interfaces is also possible.

  • There is no dead band, and it is possible to measure with the whole sensor.
    ■ also in a container of pet bottle size (on the order of several liters) corresponds
    ■ intrinsically safe type, please refer to the MAE series.
    ■ It can be used with simple initial setting (one touch push button).

We offer line up including G1 type optimum for ultra-small tank with small installation space and H2 type corresponding to high temperature / high pressure.

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]


1. to realize compact
and downsized, does not take the mounting space (amplifier unit is another location)

2. It corresponds to the harsh environment
also supports high temperature, low temperature, harsh conditions such as high pressure

3. high cleaning properties and corrosion resistance to realize
adopted a fluorine resin to the electrode portion, high cleaning and corrosion resistance to realize

4. it corresponds to the special specifications
to produce a sensor to fit your tank and specifications that Is possible


Use  Remaining amount measurement (level meter / level meter)
Measured object  Liquid / viscous liquid / granular / interface / foam / bubble neglect
Detailed measurement item  Tap water, distilled water / alcohol / pure water, ultrapure water / corrosive liquid / chemical liquid (acid · alkali) / cleaning liquid / oil (non explosion) working oil / waste liquid / viscous liquid · slurry · sludge (paint, (Sludge, urine, seawater, soy sauce, caustic soda, carbon, miso, shampoo, etc.) / powder (resin powder, resin pellet, cement, casting sand, flour, iron oxide powder (Such as toner, silica, film, powdered milk, etc.) / powder particles (incineration ash, resins etc) in high temperature environment / bubble detection, bubble neglect detection / interface detection (oil water interface etc.)
Contact / non-contact  contact
Measuring method  Capacitive type
Explosion proof  None (non-explosion-proof)
Tank size  Compact (small container size)
Mounting position  Vertical (from above)
Detailed measurement environment  High temperature / high pressure / When there is liquid / liquid flow with ripples / Material level control / Water level monitoring of water supply and sewerage


Amplifier section

Power supply AC / DC 20 to 250 V
Power consumption DC 24 V: 1.5 W AC 100 V: 2.5 V A AC 200 V: 3.5 V A
Operating ambient temperature -25 ℃ ~ + 60 ℃
output Current output DC 4 to 20 mA (load resistance 500 Ω or less)
Measurement accuracy ± 1%
resolution The larger one of 0.025% or 0.02 pF with respect to 0 to 100%
Response speed (delay) About 0.03 to 30 seconds variable
Protection grade IP20
weight Approximately 300 g (Only the amplifier part, electrode and cable not included)
Dedicated cable length Amplifier separation type (3 type) Please choose from 2m, 3m, 5m, 10m.
option RS-485 communication, handy monitor

Sensor part

Model G1 Small pencil type H2 coated electrode type
Material Coat PFA (internal electrode SUS 304) Coat PFA (internal electrode SUS 316 L)
Insulator material Polyacetal PTFE
Allowable temperature -10 ° C to + 80 ° C -10 ° C to + 150 ° C
Allowable pressure 0.1 MPa 2 MPa
Protection grade IP65 IP65
L dimension Maximum 1000 mm (depending on conditions) Maximum length of 3700 mm
option Condensation countermeasure Condensation countermeasure


Size R1 / 4 (It can be changed by request) JIS 5K 25 A
Material SUS 304 (It can be changed by request SUS 304
option Connection change (including various flanges and screws)