YAMADEN – YAL-S2

In sanitary dedicated machine, it supports the CIP · SIP. Suitable for food and pharmaceuticals.

High safety and as sanitary process dedicated machine to achieve the reliability (CIP · SIP support)

  • Optimal capacitive level sensor to the Food, Drug, and Cosmetic process.
  • Excellent for cleaning and chemical resistance, does not occur even liquid remaining.
  • Also supports the CIP / SIP process.
    • It is friendly products to maximize the sanitary resistance and hygienic safety.
    • integrated · DC24V power supply is compatible with the CE mark.
The sensor unit is fully covered by the PFA tube that is integrated with the ferrule gasket, there is no coupling portion by a plurality of parts. It also prevents clogging of the small foreign matter of the liquid remaining and fit groove by the joint penetration.
Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Features

1. CIP, SIP corresponding
heat-resistant 150 ℃, to achieve a pressure 0.5MPa, corresponds to the CIP · SIP of sanitary process.

2. pursue the sanitary of
the sanitary corresponding structure, liquid to prevent the clogging of the rest and the groove of the small foreign matter or the like, to solve this problem is of hygienic pollution and flavoring that causes the problem.

3. chemical resistance and the Food Sanitation Law on material
acid and alkali washing can accommodate a wetted All PFA (fluorine resin). Also, wetted (PFA) is using the Food Sanitation Law compatible materials.

4. durability
fit safe waterproof casing to a variety of site environment and the sensor structure to operate in harsh environments (IP68).

5. adopt the free power
can be used in countries around the world because it uses the free power of AC / DC20 ~ 250V.

6. CE Mark-certified product
in the case of integrated · DC24V power use has acquired the CE mark.

Applications and Results

Use  The remaining amount detection (level switch)
Measured  Liquid / viscous liquid / surfactant / foam / foam ignored
Details measured  Tap water, distilled water / alcohol / pure water, ultra-pure water / corrosive liquid / liquid chemical (acid and alkali) / cleaning liquid / oil (non-explosion proof) Working oil / oil (explosion-proof) fuel tank, kerosene / waste liquid / viscous liquid, slurry sludge (paint, adhesives, honey) / conductivity strongly adhere many substances (sludge, raw sewage, seawater, soy sauce, caustic soda, carbon, miso, shampoo, etc.) / bubble detection, foam ignored detection / interface detection (oil-water such as a surface)
Contact and non-contact  contact
Measuring method  Capacitive
Explosion proof  No (non-explosion proof) / Intrinsically safe
The size of the tank  Small (small container size) / medium-sized (drum size)
Mounting position  Vertical (from above) / horizontal (from the side) / diagonal (from the side) / from the bottom
Details measurement environment  High-temperature and high-pressure / piping installation / if waving there is a flow of a liquid / liquid / raw material level control / decision detection of the CIP process on the liquid in the food process

Standard specification

Amplifier section

Power supply AC / DC 20 ~ 250V
Power consumption 1.5VA below
Operating ambient temperature -10 ℃ ~ + 60 ℃ (non-condensing)
output Relay contact AC250V DC30V 3A
Highest detection sensitivity 0.5pF
Response speed (delay) 0 to 10 seconds variable
Case Material ADC12
Degree of protection IP68
Wiring port G1 / 2
Dedicated cable length 1m, 2m, 3m (amplifier separation type type 3 only), high-frequency cable 1m, 2m, 3m, 5m (amplifier separation type type 5 only)
option OFF delay (0-4 seconds variable), fail-safe H, no-contact output (SSR output, also supports NPN · PNP format), amplifier separation type

The sensor unit

Material Skin PFA internal electrode SUS304 internal insulator PTFE
Material Insulation Material PTFE
Allowable temperature -10 ℃ ~ + 150 ℃
Allowable pressure 0.5MPa
Degree of protection IP68
L dimension 100mm
option Condensation measures, electrode size change

Connection

Size IDF / ISO 1S · 1.5S ferrule
Material SUS304