YAMADEN – YAL-F1

It is ideal for liquid level detection of small tank and the piping. The sensor electrode is adjustable.

Liquid level sensor for a small flat type ideal for piping installation and small tank. And small tanks and is ideal for liquid level detection, such as piping.

Optimal inside if you do not want long to insert the sensor electrode.

  • For the flat electrode, it must not interfere with the liquid flow in the pipe.
    projecting length in the tank of the sensor electrode is adjustable.
    integrated · DC24V power supply is compatible with the CE mark.

Minimizing electrode insertion length to the tank and piping, the sensor electrode has been designed to avoid hindering the mechanical interference or liquid flow between the tank structure.

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Features

1. The electrode projection length adjustable
electrode is possible to adjust the electrode projection length, for example, when you buried by the attachment to the liquid flow environment and the tank wall.

2. High sensitivity, high performance, and miniaturization
by the state-of-the-art technology, high sensitivity, high accuracy, achieving a balance of stability detection and miniaturization.

3. harsh conditions in realizing the trust of endurance performance
high temperature, high pressure, low temperature, vacuum, vibration, also supports the difficult environment of use, such as anti-static electricity.

4. Free power and rich feature
free power of AC / DC20 ~ 250V, delay function, equipped with a rich set of features such as fail-safe function.

5. CE Mark-certified product
in the case of integrated · DC24V power when used have acquired the CE mark.

Applications and Results

Use  The remaining amount detection (level switch)
Measured  Liquid / viscous liquid
Details measured  Tap water, distilled water / alcohol / pure water, ultra-pure water / chemical solution (acid-alkali) / cleaning liquid / oil (non-explosion proof) Working oil / oil (explosion-proof) fuel tank, kerosene / waste liquid / viscous liquid slurry sludge ( paints, adhesives, honey) / conductivity strongly adhere many substances (sludge, raw sewage, seawater, soy sauce, caustic soda, carbon, miso, shampoo, etc.)
Contact and non-contact  contact
Measuring method  Capacitive
Explosion proof  No (non-explosion proof) / Intrinsically safe
The size of the tank  Small (small container size) / medium-sized (drum size)
Mounting position  Vertical (from above) / horizontal (from the side) / from the bottom
Details measurement environment  If there is a flow of high-temperature and high-pressure / piping installation / liquid / raw material level control / food process of the CIP process on the liquid in the decision detection / temperature, harsh environment and the maintenance and inspection are difficult to place / water and sewerage of the water level, such as pressure monitoring

Standard Specification

Amplifier section

Power supply AC / DC 20 ~ 250V
Power consumption 1.5VA below
Operating ambient temperature -25 ℃ ~ + 60 ℃ (non-condensing)
output Relay contact AC250V DC30V 3A
Highest detection sensitivity 0.5pF
Response speed (delay) 0 to 10 seconds variable
Degree of protection IP68
Wiring port G1 / 2
Dedicated cable length 1m, 2m, 3m (amplifier separation type type 3 only), high-frequency cable 1m, 2m, 3m, 5m (amplifier separation type type 5 only)
option OFF delay (0-4 seconds variable), fail-safe H, (non-contact output (SSR output, NPN, also supports PNP format), amplifier separation type

The sensor unit

Material SUS304
Material Insulation Material Polyacetal (Daifuron ※ also possible to manufacture high-temperature type on request)
Allowable temperature -10 ℃ ~ + 80 ℃ (180 ℃) ※ also available high temperature type on request
Allowable pressure 1MPa
Degree of protection IP68
L dimension 75mm
option Condensation measures, buff finish (# 400 or equivalent), material change

Connection

Size Sliding screw R3 / 4
Material SUS304
option Change the material and size