PIECAL – 334

The PIE 334 is functionally equivalent to similar calibrators with four digit displays, knobs and switches. Improvements over 334s from other manufacturers include better long term stability, accuracy, reliability and ruggedness plus improved battery life.

The PIE 334 is functionally equivalent to similar calibrators with four digit displays, knobs and switches. Improvements over 334s from other manufacturers include better long term stability, accuracy, reliability and ruggedness plus improved battery life.

The PIECAL 334 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. The PIECAL 334 is the perfect replacement for your worn out milliamp calibrators.

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

PIECAL Model 334 – Just Like an Old Friend

  • Calibrate Milliamp Instruments
    Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA
    Read 0.00 to 52.00 mA
    Read -99.99 to 99.99 V
    Simulate 2-Wire Transmitters; Power & Read 2-Wire Transmitters
  • Calibrate with Confidence
    Accurate to ±0.025% of Span at 4.00 & 20.00 EZ-CHECK outputs
  • Use in the Plant, Field or Shop
    Includes Rubber Boot and Attached Test Leads; Low profile switches resist accidental damage
  • Simple Battery Changes
    Separate compartment for no-tool battery changes with four inexpensive “AA” batteries
  • Optional Accessories
    AC Adaptor 120V (020-0101); 240V (020-0100); Deluxe Hands Free Carrying Case (020-0211); NiMh Batteries & Charger 120VAC/12V DC (020-0103)

Improvements over 334s from other manufacturers include better longer term stability, accuracy, reliability & ruggedness plus improved battery life. PIECAL 334 is the perfect replacement for your worn out mA calibrators!

Advantages of the PIECAL 334 over the Altek 334 and Altek 334A PIE 334

  • Backlit Display with Larger Digits
    Easier to read in dark areas of the plant
  • More Resistant to Accidental Damage
    Rubber Boot and Stronger Switches
  • Separate Battery Compartment with 4 “AA” Batteries
    No more removing housing with screwdriver to replace three expensive 9V batteries. Calibration seals remain intact.
  • Calibrate More Devices Between Battery Changes
    Drives more loop instruments at 24 Volts (up to 1200 Ohms) for entire battery life. The Altek 334 output voltage drops as the batteries run down.
  • Includes Certificate of Calibration
    All PIECAL Calibrators come with a free signed and dated certificate. Altek’s come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.

Download