GRAPHTEC – MT100

An isolated input system has been implemented to enable worry-free measurement. Ten input channels have been provided to meet multichannel needs.

An isolated input system has been implemented to enable worry-free measurement. Ten input channels have been provided to meet multichannel needs.

Rear panel terminal block

M4 screw terminals have been used for the input terminals to simplify wiring. The terminals can be tightened easily with a screwdriver. If an abnormal value arises, the alarm function informs the operator of the abnormality. Alarm output terminals for four channels are provided as standard.

Need more information?

Please contact +6221-5467618, +6221-54212399 or email [email protected]

Specification

Item Description
Number of analog input channels 10 channels
External Input/Output Trigger input, Logic input 4 ch or Pulse input 4 ch, Alarm output 4 ch
Sampling interval 100 ms to 1 h (Max:100 ms/10ch)
TIME/DIV 1 sec/DIV to 72 h/DIV
Trigger function Type Start Data capture starts when a trigger is generated
Stop Data capture starts when a trigger is generated
Condition Start Off, Level, Alarm, Scheduled time, External, Day
Stop Off, Level, Alarm, Scheduled time, Time, Day, External
Condition Analog H, L, Window In, Window Out, Rate of change
Logic H, L
Pulse H, L, Window In, Window Out, Rate of change
Alarm output No. of channels 4
Output format Relay contact output (NO/NC)
Output conditions Level judgement, Window judgement, Logic pattern judgement, Pulse judgement
Output terminal M4 screw terminal
Rating 250 VAC/2A, 30 VDC/2A
Pulse input range Count mode 50, 500, 5000, 50 k, 500 k, 5 M, 50 M, 500 M C/F.S. (max. 50 k/sampling interval)
Inst. Mode 50, 500, 5000, 50 k, 500 k, 5 M, 50 M, 500 M C/F.S. (max. 50 k/sampling interval)
RPM mode 50, 500, 5000, 50 k, 500 k, 5 M, 50 M, 500 M RPM/F.S. (max. 50 k/sec)
Calculation function Statistics calculation *1 Average, Peak, maximum, Minimum, RMS (2 calculations can be set simultaneously)
Calculation between channels Addition, Subtraction, Multiplication, Division (for analog input ch1 to ch10)
Wet-and dry-bulb temperature conversion Humidity is calculated from the measured temperature of Wet-bulb and Dry-bulb
(Dry bulb : fixed to ch1, Wet bulb : fixed to ch2, Range 0 to 100 %)
Other function Searching, Annotation input, Message, Marker function
Interface to PC Ethernet (10BASE-T / 100BASE-TX), USB (Compatible with full speed)
Ethernet function Web server function, FTP server function, FTP client function, NTP client function
USB function USB drive mode (File transfer/delete of internal memory)
Internal storage device Internal flash memory : 14 Mbyte, USB memory slot (compatible with full speed) *2
Display Size 5.7 inch TFT color LCD
Displayed items Waveforms + Digital values (vertical, horizontal), Digital + Calculation, Bar graph (vertical)
Clock accuracy (23°C environment) ±0.002 % (within approx. 50 sec per month)
Operating environment Temperature : 0 to 50 °C, Humidity : 5 to 85 % R.H.
Withstand voltage Between each input channel and GND: 1 minute at 350 Vp-p
Between input terminals: 1 minute at 350 Vp-p
Power supply 100 to 240 V AC / 50 to 60 Hz, M4 screw terminal (Power cord is not attached)
Power consumption 38 VA (when LCD is ON)
External dimensions (W x H x D)(approx.) 144 mm x 144 mm x 200 mm
Weight (approx.) 2.1 kg
Vibration resistance Compatible with JIS Vibration testing methods for automobile Type 1 Class A-equivalent
Dust proof, Drip proof: IP65 compatible (for front panel only)

Downloads