COMBI519_NEW

HT Italia COMBI519

COMBI519 carries out tests on electric systems in compliance with IEC/EN 61557-1 and therefore measurements of continuity of the protection cable, insulation resistance (with calculation of PI and DAR), overall earth resistance, RCDs type B, A and AC tripping time and current, line / fault impedance with calculation of prospective short circuit / fault current, phase sequence and conformity.

The instrument is provided with the innovative AUTO function: by selecting this function and only setting the value of RCD current, COMBI519 carries out tests of overall earth resistance, RCD tripping time and insulation resistance in a sequence. At the end of the test, the device shows all results with the indication of compliance or non-compliance with the standards with simple symbols OK or NOT OK.

The internal memory allows saving the measures and subsequently transfer them onto the PC through the optical/USB connection.

Description

Description

Functions

AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence
Insulation with voltage 50, 100, 250, 500, 1000VDC
Measurement of polarization index P.I.
Tripping time and current of F-type RCDs
Measurement of dielectric absorption ratio D.A.R.
Continuity of protective circuit with 200mA
Tripping time and current of RCDs type A, AC Standard, Selective	B type up to 300mA
Non-trip earth resistance
Loop/Line impedance Phase-Phase, Phase-Neutral, Phase-PE with high resolution (0.1mΩ)	With optional accessory IMP57
Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE
Percentage voltage drop on the line
Contact voltage
Phase sequence
Help on line on the display
Internal memory for measured data saving
Optical/USB serial port for PC connection
Protection rating
Power supply
Protection category	CAT IV 300V
Weight in grams (batteries included)	1200
Size (LxWx H) (mm)	222x162x57