Request For Quotation
Enjoy Special Offer Only For You
Contact Us :
- +62 812 8783 1637
- [email protected]
- (021) 5467618
- [email protected]
- JL. Boulevard Raya, Blok BA 3 No. 15, Gading Serpong, Tangerang
The TEG range of digital pressure gauges provide high accuracy, resolution and stability.
The robust design means that each gauge can be used in critical environments where it is
necessary to measure with accuracy, reproducibility, long-term stability and protection against
dust. A removable rubber cover provides increased durability and guards against damage.
Gauges are available with accuracy up to 0.02 % of full scale, with simple controls and
various features for improved usability. An RS-232 port situated on the rear of the unit for
software readback (EasyCal software from Time Electronics).
Applications include lab and field pressure testing when accompanied by a hand pump for
pressure generation (see separate data sheets for available models). Gauges can be utilised
for pneumatic or hydraulic calibration work.
Features
| Weight | 100 g |
|---|
Basic Specifications
Ranges ………………………………… Vacuum to 2500 bar. See page 2 for available models and ranges.
Pressure Types ……………………………………………………. Gauge / Absolute / Differential / Compound.
Accuracy …………………………………………….. 0.2, 0.1, 0.05, 0.02 % FS. See page 2 for further details.
Pressure Units ………. Total of 11 pressure units possible: Pa, kPa MPa, Kgf/cm2, mmH2O, inH2O,
…………………………..mmHg, inHg, PSI, mbar, bar. Some units are not enabled depending on range.
Over pressure warning …………………………………………………………………………………………..120 %
Measure speed ……………………………………Display rate: 3 readings per second (default setting).
…………………………………..Adjustable from 10 readings per second to 1 reading every ten seconds.
Display ………………………………….LCD with backlight, pressure values displayed up to 5 digits with
………………………………………………. 15 mm character height and analogue dial graph 25 mm wide.
Resolution …………………………………………………………………………………………………………..5 digits.
Analogue dial graphic ……………………….Includes pressure swing, % indication, low/high alarm.
Peak detection ……………………………….. Maximum and minimum peak values can be displayed.
Ambient temperature measurement ……………………….. From -10 °C to 50 °C, resolution 0.1 °C.
RS-232 Interface …………………………………………………………. DB9. EasyCal software compatible.
Pressure Port ……………..1/4 ” G BSP male, 1/2 ” G BSP male (>1000 bar). NPT & others available.
………………………………………………………………0.156 inch (4 mm) test hose for differential pressure.
General Specifications
Environmental
Operating temperature: -10 °C to 50 °C (14 °F to 122 °F).
Compensation temperature: -10 °C to 50 °C (14 °F to 122 °F).
Storage temperature: -20 °C to 70 °C (-4 °F to 158 °F).
Relative humidity: < 95 %.
Power
Battery: 1x 9 V alkaline battery (included).
Battery life: 300 hours (10 readings/sec), 6000 hours (1 reading/10sec).
Power auto-off: 60 minutes power auto-off, can be disabled by user.
9 V 5.5 x 2.1 mm External power socket.
Materials
Case material: Aluminium alloy. Wetted parts: 316SS.
Dimensions/Weight
Display head only: 112×40 mm, Total height: 178 mm. Weight: 580 g.
COMING SOON !